Thank you very much mate. I am soon going to work full time for RedCat
Racing. Well the motor Oil Experiment has great results. Since then I did
not change or refill oil in shocks and they are still good. But getting a
bit softer so maybe time to change again 😀
How Do I lower a Volcano SV ?? The shocks are already mounted in the top
holes. Should I take some oil out. The steering arms hit the frame because
the shocks are so stiff. I had to bend the metal frame a little but don’t
want to go more. Thanks. Keep up the good work.
have you not heard of stronger springs?! changing the oil only affects the
dampening. Even with thicker oil it will still sag down, it will just
happen slower…..
you shouldent use pliers you should wrap them in electrical tape so it
doesnt damage the metal bit otherwise it will ruin the seal and it will
break your shocks… :0
You should really wait at least 30 mins to let ALL air bubbles out before
you cap it up,,try it and youll see some more bubbles of air if you watch
it for 30 mins. exspecially with motor oil!!! LOL
January 5th, 2014 at 2:01 pm
can Sae 30 Nondetergent oil be used,??
January 5th, 2014 at 2:08 pm
welcome mate
January 5th, 2014 at 2:30 pm
Could i convert kysosho fazer into a rally car What upgrades would i need
besides the tires Please answer your big fan Filip from Serbia
January 5th, 2014 at 3:19 pm
guuud but guess wat my mate is givin me a drill and taking my old pull
start off then givvin me a socket for drill so i got a drill start 😀
January 5th, 2014 at 4:06 pm
Thank you very much mate. I am soon going to work full time for RedCat
Racing. Well the motor Oil Experiment has great results. Since then I did
not change or refill oil in shocks and they are still good. But getting a
bit softer so maybe time to change again 😀
January 5th, 2014 at 4:36 pm
@filip500filip to be honest, I have never used a kyosho and never done
that. I think you can find more useful info on RC Universe forums about it.
January 5th, 2014 at 4:52 pm
How Do I lower a Volcano SV ?? The shocks are already mounted in the top
holes. Should I take some oil out. The steering arms hit the frame because
the shocks are so stiff. I had to bend the metal frame a little but don’t
want to go more. Thanks. Keep up the good work.
January 5th, 2014 at 5:23 pm
Can I use Olive Oil or veggie oil insted? Or should I just buy shock oil 😉
January 5th, 2014 at 5:48 pm
Thanks for the info!! It will be a big help!! Just got a used RC Truck and
it needs shock oil!!!
January 5th, 2014 at 6:30 pm
i used olive oil!!!!!no mater if the oil is black remove it and put new it
will so muck work that is what i did!!
January 5th, 2014 at 6:38 pm
always welcome
January 5th, 2014 at 6:42 pm
@alishanmao ok thanks, ill try that.
January 5th, 2014 at 7:12 pm
have you not heard of stronger springs?! changing the oil only affects the
dampening. Even with thicker oil it will still sag down, it will just
happen slower…..
January 5th, 2014 at 7:31 pm
Can you make a video on how to put spring spacers in a rc car? bc i can’t
find 1 video on youtube about that
January 5th, 2014 at 8:30 pm
you shouldent use pliers you should wrap them in electrical tape so it
doesnt damage the metal bit otherwise it will ruin the seal and it will
break your shocks… :0
January 5th, 2014 at 8:58 pm
You should really wait at least 30 mins to let ALL air bubbles out before
you cap it up,,try it and youll see some more bubbles of air if you watch
it for 30 mins. exspecially with motor oil!!! LOL
January 5th, 2014 at 9:24 pm
full open them (not compressed) then fill oil, but do not fill it till top.
January 5th, 2014 at 9:58 pm
So you used car oil and what kind?